For most people, their hard drive is their life. With hundreds of photos, videos, and documents stored in it, its loss could might as well spell your death. Hard drives are built to last for as long as possible, but in some cases, it malfunctions and that’s when hard drive clicking recovery becomes crucially important.
A hard drive that does not boot makes that infamous clicking sound, and tutorials online will tell you to shut down your computer as fast as possible and to never open the case of the hard drive.
That clicking noise in your hard drive is more than just an annoyance, its the symptom of a severe problem. Professionals will tell you to replace your hard drive to prevent further issues from happening, but for those who don’t give up, you can try fixing your hard drive on your own. Here are some tips you might want to consider for hard drive clicking recovery.
Hard Drive Clicking Recovery: Run a Process
Before you consider mangling your hard drive, theres one thing you can do that might fix the problem. Before anything else, run the CHKDSK C: /F /R. This will run through the system of your computer and figure out if there are present issues.
Once the process goes through damaged sectors, your computer will try to fix it on its own. Remember that you need to reboot the computer after running the scan to determine of this hard drive clicking recovery method fixed the problem.
Hard Drive Clicking Recovery: Rebooting the Computer
Another hard drive clicking recovery method you can try out is rebooting your computer and checking if the clicking is still present. If the clicking still exists, you will need to remove your hard drive and open it.
Make sure your computer is turned off when removing the hard drive and that it is unplugged. Check your computers manufacturer if you need instruction on how to remove your hard drive by disconnecting it from your motherboard.
Hard Drive Clicking Recovery: Opening Up Your Hard Drive
As last resort, you can open your hard drive to check if the arm is making noise from the inside. You can open your hard drive by using precision screwdrivers. Clean the hard drive with a dust remover spray and spray around the arm very lightly.
Dirt or dust that have accumulated may prevent the arm from moving, causing the clicking sounds. Insert your hard drive back to the computer and turn the computer on to see of the problem has been fixed.